2″ Eyeball Gimbal LED Fixture 5W
- Fully Dimmable
- cULus Approved, Energy Star and T24 Certified
- Type IC Rated – Approved for Direct Contact with Insulation
- Air-Tight, Wet Location, Insulated and Non Insulated Ceilings
- Superb Light Quality with CRI > 90
- Recessed Housing is NOT Required even for Insulated Ceilings
- Warranty: 5 Years
Round 2″ Gimbal fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box.
One driver for every fixture required.
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Ceiling Clearance Required: 1 1/2″ with driver remotely installed, 5″ if driver is next to the fixture..
- Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)
- Power factor: > 0.95
- Energy Used: 5W
- Halogen equivalent: 35W
- Beam Angle: 24° Beam with 30° tilt and 360° rotation
- Light colour options: Warm White 2700K, Soft White 3000K, Neutral White 4100K
- Light output: Warm White 380 lm, Soft White 400 lm, Neutral White 430 lm
- CRI: 94 for the 2700K & 3000K, 92 for the 4100K
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus approved, certified to CSA STD. C22.2 No. 250.0
- Rated: Type IC (Direct Contact with Insulation), Energy Star, T24, Air-Tight
- ID 2″, OD 2 1/2″; Thickness 1 1/2″
- Cut out: 2″ to 2 1/8″
- Junction Box Dimensions (with driver inside): 3 3/4″ x 2″ x 1 3/4″
Suitable for wet locations and soffit installations.
|Cut Hole Size||CA$2,218.00|
|IP Rating||Wet Rated|
|Diffuser Lens||PMMA Diffuser|
|Minimum Working Temperature||-20°C|
|Material||Die Cast Aluminium|
|Package Contents||1 x Gimbal Fixture, 1 x Driver Box|
|Master Carton Size||24|
|Type of Store Credit value||Select|